Maintenance and maintenance of the reducer: For the maintenance of the reducer reducer, the first thing to do is to check and replace the oil level and oil.
Check the oil level of the reducer first to turn off the total power of the machine to prevent dangerous things, and wait for the reducer to cool down before installing the oil level plug and the oil level plug should be removed to see if the oil is Within the prescribed scope, if it is not within the specified range, it should be topped up in time, and the following matters will be introduced on how to refuel.
For the inspection of the oil, the main power supply of the machine should be turned off to prevent dangerous things and wait for the reducer to cool down completely. For the machine with the screw plug installed on the reducer, the oil should be sampled to confirm whether the oil is turbid and within the specified range. For internal use, if it is turbid, it should be replaced in time to confirm safe production.
For the inspection of refueling, the total power supply of the appliance should also be turned off. When there is no danger of burning or replacing the oil, we should add the same new oil of the same quality to the reducer to be replaced or filled to confirm that it will not be produced. reaction. If the gear unit is to be replaced with oil, the original oil must be removed before the new oil can be added.
